FIRE ANGEL W2-CO-10X

Our W2-CO-10X, Wi-Safe 2 carbon monoxide alarm is a 10 year battery powered, sealed-for-life, wireless interlink CO alarm providing complete protection from CO poisoning in the home. The W2-CO-10X sends a wireless signal to all other Wi-Safe 2 products when it detects CO.

CO Alarm Positioning
Ideally a Carbon Monoxide Alarm should be installed in every room with a fuel burning appliance. Additional alarms may be installed to provide adequate warning for occupants in other rooms, by placing alarmrs in rooms in which they spend considerable time whilst awake.

CO Alarm Installation
To mount on a wall or ceiling:
1. Preparation
Unclip the base plate from the back of the alarm, Break out the tabs from the base plate. Use fixing slots on the base plate as a guide when marking the position of the drill holes. With an appropriatley sized drill, drill the holes and insert the plastic fixing anchors supplied (if needed),
2. Install the Base
Fit the base plate to the ceiling or wall using the screws provided.

- Features Wi-Safe 2 - One alarm goes off - they all go off
- Features advanced electrochemical sensor designed to accurately measure levels of CO
- Suitable for wall mounting or freestanding offering greater flexibility in positioning
- 10 year sealed for life battery
- Wi-Safe.pngWi-Safe 2 - wirelessly interlink multiple alarms one alarm goes off they all go off
- Locate.pngLocate feature - silence all but initiating alarm in network
- 5 Year Warranty year warranty
- Kitemark.pngCertified to BS EN14604:2005 and LPCB approved