YongNuo YN-622C-TX - Specificaties

This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manua, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. Support USB firmware upgrade.\nLCD screen display, multi-buttons quick operation\nThe firmware can be upgraded through the USB interface \nSupport wireless shutter release function \nThe focal length(zoom)of the A/B/C three groups of flash can be adjusted separately \nEquipped with the AF focus assist light (can be disabled)\nGrouping flash mode: e-TTL/Manual flash/Super sync\nSupporting mixed use of the A/B/C three groups of flashes with e-TTL, Manual flash, or Super sync flash mode\nThe exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately\nShutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s\nSupport exposure compensation, flash value lock function(FVL) \nSupport simulate (modeling) flash, red-eye reduction flash\nSupport the flash zooming (auto)\nSuper Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows\nSettings saved automatically\nThe flash sync signal can be input through the PC port \nSupport the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body)\n*The above functions need to be used with the YN-622C transceiver.\n*The transmission distance may be shorter depending on the conditions such as the positioning of slave units, the surrounding environment and weather conditions.\nThe functions of this page are based on test conditions of our company. Further notice will not be given if the design and specifications change.