Fischer GKM S K NV Gipsplaatplug - 31 mm - Set van 6 - Franse draad

The fischer gypsum plasterboard fixing GKM S K is made of metal. When in pre-positioned installation, the plug is screwed in either manually or with a cordless screwdriver so that it is flush to the surface in gypsum plasterboard. No pre-drilling is required with single planked gypsum plasterboard panels. With gypsum fibreboard and double-planked gypsum plasterboard panels pre-drilling should take place with a Ø 8 mm drill. The fischer GKM S K is fully delivered with a chipboard screw with a countersunk head. It is therefore universally suitable for quickly and safely mounting lights, electrical installations, and interior accessories.\n\nAdvantages\n- Due to its material properties, the GKM can be used in gypsum plasterboard and gypsum fibreboard, and can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.\n- The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity.\n- The cross-drive recess means that a standard screwdriver or bit can be used. No special setting tool is required.\n- The short fixing length means that only a small amount of space is required behind the board. As a result, the GKM can also be used in the case of unknown board thickness and cavity depth.\n\nApplications\n- Pictures\n- Lighting\n- Electrical installations\n- Fitting accessories\n\nBuilding materials\n- Gypsum fibreboard\n- Gypsum plasterboard\n\nFunctioning\n- The GKM is suitable for pre-positioned installation.\n- The self-tapping metal fixing GKM taps itself into the plasterboard with a positive fit.\n- Flush installation in the board building material. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.\n- Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.\n- Pre-drill with a Ø 8 mm drill bit when using gypsum fibreboard and double-planked gypsum plasterboard.\n- Not suitable for tiled plasterboard.\n\n- Less space required behind the board due to a short fixing length\n- Suitable for pre-positioned installation\n- Suitable for lightweight objects\n- No drilling needed in simple planked gypsum plasterboard. This saves time\n- Complete with suitable screw